Durabella Impact 8

Durabella Impact 8 is an ideal solution for sound insulation where low storey height is required. Impact 8 can be used in residential and commerical buildings e.g. hotels, schools and industrial units.

Impact 8 has been specially developed for sound absorption under extreme dynamic or static loads. The re-cycled material remains permanently resilient and resistant to perishing.

Installation

Impact 8 is rolled out & loose laid over the entire screeded subfloor.

The Perimeter edge detail should be insulated by upright strips of Impact 8 to prevent the screed finish making contact with the surrounding walls.

Following the installation of Impact 8, a DPM membrane should be laid prior to the screed application.

Durabella Impact 8 - Technical Data

Description

Prefabricated roll material, made from recycled rubber compound bonded with Polyurethane binder.

Application

Applied underneath the entire screed area in dwellings on intermediate solid floor construction as sound insulation layer.

Dimensions

Supplied in rolls 1.250mm wide x 10 metre long x 8mm thick (profiled)

Benefits

• No Loss of thickness under extreme dynamic loads
• quick installation
• reduces storey height
• can be fully recycled